Heavy duty Four-Side moulder series M40

Specification & type		WMM640	WMM540	WMM440
Working Width (mm)	Min.	120	120	120
	Max.（max. cutting circle of 160mm ）	400	400	400
Working Thickness (mm)	Min.	30	30	30
Working Thickness (mm)	Max.（max. cutting circle of 160 mm ）	300	300	300
Speed of spindly		6	5	4
Spindle Speedr/min)		6000	6000	6000
Cutting circles(max~min)(mm)	First Bottom Spindle	Φ160~Φ180	Φ160~Φ180	Φ160~Φ180
	Right side Spindle	Φ160~Φ230	Φ160~Φ230	Φ160~Φ230
	Left side Spindle	Φ160~Φ230	Φ160~Φ230	Φ160~Φ230
	First Top Spindle	Φ160~Φ230	Φ160~Φ230	Φ160~Φ230
	Second Top Spindle	Φ160~Φ230	~~~~~	~~~~~
	Second Bottom Spindle	Φ160~Φ230	Φ160~Φ230
	Max.OD for installing saw on 2nd bottom spindle	Ø300	Ø300	~~~~~
Spindle diameter (mm)		Ø50	Ø50	Ø50
Basic motor powers (kW)	First Bottom Spindle	15KW/20HP	15KW/20HP	15KW/20HP
	Right side Spindle	15KW/20HP	15KW/20HP	15KW/20HP
	Left side Spindle	15KW/20HP	15KW/20HP	15KW/20HP
	First Top Spindle	15KW/20HP	15KW/20HP	15KW/20HP
	Second Top Spindle	15KW/20HP	~~~~~	~~~~~
	Second Bottom Spindle	15KW/20HP	15KW/20HP	~~~~~
	Feed	11KW/15HP	11KW/15HP	7.5KW/10HP
	Feed beam rise & fall	1.5KW/2HP	1.5KW/2HP	1.5KW/2HP
Total motor power(KW)		103.25KW/138HP	88KW/118HP	69.25KW/92.4HP
Feed speed (m/min) (Inverter for feed )		5~25	5~25	5~25
Dust outlet diameter(mm)	vertical spindles	Φ150mm	Φ150mm	Φ150mm
Dust outlet diameter(mm)	horizontal spindles	Φ180mm	Φ180mm	Φ180mm
Overall machine dimensions (L×W×H) (mm)		5620×2200×1950	5000×2200×1950	4210×2200×1950
Weight(Tons approx)		12	10.5	9

Note: Any variation to the specification above mentioned will not be further notified since the product specification and design keeps on changing all the time.

1. Special processing range, widely satisfy the needs of greatness workpieces. The Max. working widthis 400mm,and the Max. thickness is 250mm

2. Each spindle with the diameter of 50mm . The out bearing on the horizontal spindles can increase the carrying capacity . The Max. outer diameter of cutting circle reaches 230mm, this is good to improve the machining quality.

3. The feeding system is built up with 6 groups of bottom rollers and 12 groups of top feeding rollers which OD is 180mm, They are driven by pneumatic to ensure powerful feeding. Besides, the 1st bottom roller and infeed table can move up and down at the same time to simplify to adjustment

4. The surface of the working table is chrome-plated, the hardness is as high as HV800 degrees or more, and the wear resistance is good

5. The left and right spindles are designed to adopt double-desk working table. The axial adjustment range is 80mm. As it can hold two groups of cutter blocks, it is flexible for machining.

6. The working thickness of top spindle and the working width of left spindle are adopt electric setting. Higher precision and easier to operate.

7. Each feeding roller , side pressure wheels, front and rear pressure board of top spindle are pressed by pneumatic. The pressure can be adjusted and it is convenient to control.

8. Motion adjustment is widely adopted pneumatic-locking each spindle and the inter-lock with the electric system is for safety and simplify operations

9. For the 2nd bottom spindle, There is individual motor automatically to lift the top pressure shoe, and the saw blade installed reaches the diameter of 300mm .The top pressure shoe which is controlled by pneumatic enlarged the working range as well.

10. To assure powerful cutting, the spindles are with high-power motor and driven by synchronous belt.

11. Inverter feed speed of 4-20m/min.

12. Electric oil pump lubricates the working table in timing and ration (which can be adjusted) , centralized lubrication to moving parts by manual oil pump.

13. Adopting PLC system to achieve the control of each spindle motor and location setting device.

14. Moveable PLC screen , convenient for using

15. Adopting electric components from international class with steady quality

16. Pneumatic blower to ease the cleanness

17. Sealed safety cover is for the protection against noise and dust, and it is helpful for safe operation.